CCTV Storage Sizing
Size 120-day primary and failover recording for MOI SSD, fit it onto any vendor's controllers and JBODs with an optimised RAID 5 / RAID 6 layout - then export the DSA storage calculation as a ready-to-submit PDF.
STEP 1
Cameras & retention
MOI SSD standard: 120 days, 24/7.
26.5 GiB / camera / day · 3.10 TiB / camera for 120 days · 620.00 TiB primary
Cameras
200
1 camera set
Primary required usable · 120 days
620.00 TiB
681.70 TB
Calibrated to the rule of 3.1 TiB per camera for 120 days at 2.5 Mbps (about 5% above raw bitrate maths, covering metadata and overhead), scaled linearly for each set's bitrate and days. Fields tagged “report” are printed on the DSA report only.
CCTV storage calculation for MOI Qatar DSA submissions
Every CCTV design for a regulated premises in Qatar goes through the Ministry of Interior Security Systems Department (MOI SSD). At Design Stage Assessment (DSA) the contractor submits drawings, the camera schedule, equipment data and a CCTV storage calculation that proves the recording servers hold every camera for the required retention - 120 days of 24/7 recording for most premises under Law No. 9 of 2011.
This calculator is built for ELV projects in Qatar - hotels, towers, malls, residential compounds, schools, hospitals, warehouses and government buildings. It turns the camera schedule into usable capacity, plans RAID 5 or RAID 6 arrays across NVRs, storage servers and JBOD expansion units from any vendor, and exports the storage calculation sheet as an A4 PDF ready to attach to the DSA document.
Multiple camera sets
Mix 2MP indoor, 4MP perimeter and 8MP overview cameras with their own bitrates in one project.
Primary and failover (FOS)
Size 120-day primary recording and a separate failover retention, each on its own storage sets.
Controllers with JBODs
Model each NVR or storage server with the JBODs chained to it, with licensed channel limits.
DSA-ready PDF
Project block, per-server disk pool / array table, summaries and drive-bay layout - one click.
How the MOI SSD storage calculation works
- Enter each camera set with its count and bitrate, plus primary and failover retention days.
- Storage per camera = 3.1 TiB × (bitrate ÷ 2.5 Mbps) × (days ÷ 120), including file-system and metadata overhead.
- Cameras are distributed across storage sets - balanced or filled in order - respecting licensed channels and whole-camera placement per disk pool / array.
- Each storage set gets the fewest drives that hold its cameras, in balanced RAID groups, with optional hot spares.
- Export the DSA storage calculation PDF and attach it to the MOI SSD submission.
Frequently asked questions
What is a DSA for CCTV in Qatar?
DSA (Design Stage Assessment) is the design-approval stage of the Ministry of Interior Security Systems Department (MOI SSD) process for security systems in Qatar. The contractor submits the CCTV design package - drawings, camera schedule, equipment data and the CCTV storage calculation - for review before installation and the later site inspection.
How many days of CCTV recording does MOI Qatar require?
The standard requirement for premises regulated under Qatar Law No. 9 of 2011 and the MOI SSD guidelines is 120 days of continuous 24/7 recording, which is this calculator's default primary retention. Failover (FOS) storage is often sized for a shorter period - set the failover retention to match your approved design, and always confirm against the latest SSD requirements for your project category.
How does the calculator size storage per camera?
It is calibrated to 3.1 TiB per camera for 120 days at 2.5 Mbps (continuous recording, including roughly 5% file-system and metadata overhead) and scales linearly with each camera set's bitrate and the retention days. Different camera sets in the same project can have different bitrates.
Why does the report show TiB for available storage but TB for proposed storage?
Drives are sold in decimal terabytes (1 TB = 10^12 bytes) while operating systems and VMS platforms report binary tebibytes (1 TiB = 2^40 bytes). A 22 TB drive gives about 20.01 TiB. Required and available storage are shown in TiB so they compare like-for-like; proposed storage is the installed drive capacity in TB.
Should I use RAID 5 or RAID 6 for an MOI-compliant NVR?
RAID 5 is widely used and gives one drive of protection per array. With large 16 TB+ drives and wide arrays, rebuilds take a long time and a second failure during rebuild loses the array, so RAID 6 (two parity drives per array) is the safer choice. The calculator compares both and shows drives, efficiency and fault tolerance side by side.
Can I plan a controller with several JBOD expansion units?
Yes. Each storage set is one controller (NVR, storage server or SAN head) with any number of JBODs chained to it, and you can add as many independent sets as you need for primary and for failover recording. A JBOD always belongs to a controller, and every set is planned and drawn on its own in the exported report.
Is the exported PDF an official MOI form?
No. It follows the storage calculation sheet layout commonly submitted with CCTV DSA packages in Qatar (project details, per-server disk pool / array table, primary and failover summaries) and adds a drive-bay layout. Review it and check the current MOI SSD submission requirements before you submit.
